Click image to view full size image
SGCC, DX51D 0.23mm to 3mm double side durability Hot Dipped Galvanized Steel Strip for constructions
Hot Dipped Galvanized Steel Strip
1.Capacity: about 8000ton per month for steel sheet product
2.Thickness: from 0.23mm to 3mm
Process of Galvanized Steel Strips :
Pay off reel → double cut shear → welder-notcher → entry accumulator → pre cleaning section → furnace → hot bridle → zinc pot → air knife → after cooler → water quench → dryer → skin pass mill → dryer → tension leveler → dryer → chemical coater → chemical oven → cooler → exit accumulator → oiler → exit shear → tension reel.
Specifications of Galvanized Steel Strips :
1) Capacity: about 10,000ton per month for steel tape product
2) Thickness: from 0.20mm to 3.5mm, all available.
3) Width: from 5mm to 600mm, all available.
4) Grade: Q195, SGCC, DX51D
5) Coil weight: from 5kg to 6000kg, all available.
6) Coil ID: 100mm - 508mm
7) Coil OD: 500mm - 1300mm
8) Elongation: Min 10%
9) Tensile strength: 28.1-49.2kgf/mm2
10) Zinc coating weight: Min. 106g/m2, double side
11) Min trial order 5ton each thickness, 1 x 20' per delivery.
12) Components: C%≤ 0.07, Si%≤0.03, Mn% ≤ 0.50, P% ≤ 0.025, S% ≤ 0.025, Alt% ≥ 0.02
